Select Page

Frequently asked Questions


Expert Answers to FAQ’s with “Live Chat”

  • We have a “Live Chat” system running so you can ask questions live to assist you in making decisions.
  • Manning the “Live Chat” system is an experienced member of the team whom has fitted many blinds and has a wealth of knowledge to share.
  • We DO NOT use sales people to man our “Live Chat” and do not pay commission, just give great advice.

How do you measure for Temporary Blinds?

If the blinds is covering the whole recess the measure the width and drop of the recess in 3 places and choose the size that is larger.

If you are covering each glass pane then measure the width and drop of the glass and select a size that is larger. Remember as they are formed from paper one blind can be cut to cover more than one pane of glass.


Are Temporary Blinds suitable for Skylight Windows

Temporary Blinds are NOT suitable for Skylight Windows as they are only designed to be hung Vertically within 10 degrees

How do you fit Instershade temporary blinds?

  1. Measure the recess or glass pane at its narrowest point.
  2. Cut the paper shades to the correct width using a pair of scissors or a sharp knife to.
  3. Peel off the backing to the adhesive strip.
  4. Stick the blind in place.

What colour temporary blinds do you stock?

We stop Instershades in Blackout, White, Grey, Cream, Cafe and Chocolate.

The Blackout and White Temporary Blinds are also available in a larger size.

The Great is our most popular of the different colours.

How do I measure for a new blind?

Firstly use a metric measuring tape and record all of you measurements in mm as they are more accurate to communicate.

Measure the width in 3 places, top, middle and bottom. If there are any narrow points in the recess then ensure that is one of the points used.

Measure the drop in 3 places, left, middle and right.

Now enter the smallest width and the shortest drop into the measurement options on our website and select recess size.

Thats it, the manufacturer will make the industry standard adjustments to make your blind.


How much would you add on each side of a Blind when fixing outside the recess?

Roman Blinds

When Measuring for Roman Blinds I would normally add 150mm to the Recess drop, so the fabric is just below the the Recess when the Blind is raised.

For the sides, if there is room I would add 50mm, to the Recess Widthon each side, or if its a similar size, the width of the sill.

When you fit the blind it can then be aligned to the sill, that looks great.

These Measurements would be ordered “Actual Size”.

Roller Blinds

With Roller Blinds you would add 100mm to the Recess drop and again 50mm, to the Recess Width, on each side as before. However remember to order the Roller “Fabric Size”.

The Brackets and the controls of the Roller will protrude by around 18mm past the fabric on each side, so ensure you have enough clearance.

What screw should I use to hang a blind?

Ideal screw type depends on the blind and how its being fixed.

If fixing a roller blind back to a UPVC or Wooden window frame then use a 12mm x no8 self tapping screw, ensure you pilot first to ensure that the screw does not run of to one side when tightened.

For fixing with a rawl plug use a good quality No 4 x 40mm wood screw, you can use 30mm with some rawl plugs but check their specification first.

If its a damp area then you may wish to consider a stainless steel screw to prevent corrosion but be gentle as they are more brittle than a normal screw.

Why choose a vertical blind with Chainless Bottom weights?

Vertical blinds have traditionally been provided with a weight in the bottom of the slat with a clip on each side for a stabilizing chain.

Unfortunately these tend to be the most venerable part of the blind with the chains or clips on the weighs being broken by chairs, children and pets.

We provide all of our Vertical blinds with a fully stitched bottom pocket and a heavier chainless weight design.

This improves the overall robustness of the blind and improved its expected lifespan.

The look of the chainless weights is much cleaner and gives a great look that makes a highly noticeable improvement on dark fabrics particularly.

How do you fix Roller Blinds in a bend such as a Bay Window?

Roller Blinds are not the first choice for splay Bay Window but can be a good choice for Square Bays and Conservatories.

When measuring you must remember that the blinds cannot over lap or be bent.

One Roller Blind goes all of the way into the corner of the bend and the width of the other is shortened by the depth of the bracket.

You can find the depth of our brackets on the Bay Window measuring instructions.

Do think carefully which blind you wish to be shorter as it can make a difference to the shading and privacy provided.

Which are the best blinds for Child Safety?

Several children die every year in the UK due to cords and chains on Blinds.

You can fix safety devices such as cleats or a chain tensioner to improve safety but the best option is to avoid the situation all together.

Wand operated Vertical blinds have no dangerous chains or cords and are operated be moving the wand to the side which is a much safer option.

All of our Vertical blinds also come with chainless vertical weights that again remove the chains from the bottom of the blind where they are venerable.

Expert Answers to our FAQ’s

We have a “Live Chat” system running so you can ask questions live to assist you in making decisions. Manning the “Live Chat” system is an experienced member of the team whom has fitted many blinds and has a wealth of knowledge to share.

You will find advice on how to Measure and Fit  Blinds in the How To section.

Of a particular help is the How To Measure Bay Windows in our How To section including a step by step photo tutorial. You can also download a PDF version to print off and keep with you whilst measuring.

Ask us your questions, where possible include a photo, they say a 1000 words. We also have a twitter feed that covers some of our inspiration ideas and top tips @DBlindsCurtains.